Y-Rack

The Y-Rack is the perfect complement to Speck Gear's bikepacking bags. The rack is manufactured from precision steel tubing in a small factory in Zurich and is designed to withstand the highest loads while remaining lightweight. The design is pared down to the essentials, while the innovative, adjustable mounting system is highly stable. The rack is made of stainless chrome steel in stress areas and has a durable powder-coated finish. Thanks to the Y-Rack's integrated height adjustment, the center of gravity of the luggage can be optimally adjusted.
Using a spirit level, you can adjust the tilt of the rack platform to a maximum of -12° or align it parallel to the ground. Then, adjust the aluminum mounting struts for mounting on the seat stays to the desired shape.

Color: Black Matte
Size: 12 x 31 x h34–37 cm (width x length x height)
Pipe diameter: 10 mm
Weight: 422 g (additional fastening material 107 g)
Payload: 20 kg
Tire width: up to 29 x 3.0" (75-622) without mudguard
Wheelbase: 150–180 mm
Mudguard assembly: possible
Extras: Height adjustment by 30 mm
Recycling: Separate the different materials and ensure proper recycling

Compatibility: The Y-Rack is designed to be compatible with most bicycle frames and forks that have the appropriate mounting points. Make sure your frame is suitable for installation. If you are unsure, please contact your bicycle manufacturer or take it to your bike shop to check compatibility. Your frame should be equipped with rack eyelets on the dropouts and upper seat stays. The V-Rack is designed to mount on frames with dropouts that are 150 to 180 mm wide. Some frames do not have threaded eyelets on the seat stays, so a seat clamp with integrated rack mount or the Tubus clamp adapter set can be used.

A notice: All Tubus/Racktime accessories also work with Speck Gear racks.

Downloads: Y-Rack assembly instructions

• Risk of injury due to incorrectly attached products: Check that the product is securely attached before riding.
• Risk of injury due to damage to the luggage rack when transporting people and attaching a trailer: Do not transport people or attach a trailer to the luggage rack.
• Risk of injury due to material breakage due to overloading: Do not exceed the maximum load of 20 kg total and a maximum of 10 kg per side. If necessary, weigh the load to ensure that the maximum load is not exceeded.
• Risk of injury due to insufficient clearance between the luggage rack and the tire: The clearance between the luggage rack and the tire must be at least 20 mm. Check the clearance after installation.

• Rack
• 2 pieces of aluminum mounting struts, length 240 mm
• 4 pieces of stainless steel grub screws, M5 x 6 mm
• 2 pieces of stainless steel pan head screw, M5 x 12 mm
• 4 pieces of stainless steel washers, M5
• 2 pieces of stainless steel pan head screw, M5 x 20 mm
• 2 pieces ABS spacers, 5 mm
• 2 pieces stainless steel eyebolts, M6 x 50 mm
• 2 pieces stainless steel lock nuts, M6
• 1 piece stainless steel pan head screw, M5 x 8 mm
• Assembly instructions
• Speck Gear Sticker